Home > CENTRIFUGATION > All Products > JA-14 Rotor, Fixed Angle, Aluminum, Biosafety Lid, 6 x 250 mL, 14,000 rpm, 30,100 x g

JA-14 Rotor, Fixed Angle, Aluminum, Biosafety Lid, 6 x 250 mL, 14,000 rpm, 30,100 x g

[print this page]

Part Number: 339247

JA-14 Fixed-Angle Rotor, Aluminum

Major applications: General-purpose, large-volume and multi-tube processing. Adapters permit use of up to 30 each 15-mL tubes and up to 72 each 3-mL tubes.

For use in AvantiÂ® J Series and J2 Series centrifuges.

Quantity:

Specifications

UNSPSC:	41103909
Rotor Type:	High Performance - Fixed Angle
Maximum Speed (RPM):	14,000 rpm
*Maximum RCF at r max (g):*	30,100 x g
k-Factor:	1,764
Rotor Material:	Anodized Aluminum
Imbalance Tolerance:	10 g
r min:	35.0 mm
r av:	86.0 mm
r max:	137.0 mm
Nominal Rotor Capacity:	1,500 mL
Number of Rotor Cavities x Nominal Largest Load Capacity:	6 x 250 mL
Nominal Largest Container/Bucket/Carrier/Canister Dimensions:	62 × 120 mm

Adapter

342098	Adapter Assembly, Delrin, Tube, 14 mm dia (qty. 1)
356997	Adapter, Polypropylene, Tube, 29 mm dia (qty. 1)
356983	Cushion, Bottle, 62 mm dia (qty. 4)

Consumable

870138	O-Ring, Lid, Rotor, JA-14
346965	Tool, Rotor Removal
811656	O-Ring, Stationary Seal, Outer Perimeter

Instrument

369001	Avanti® J-E Centrifuge, 50/60 Hz, 200/208/240 V
369005	Avanti® J-E Centrifuge, 50 Hz, 200 V, 24 A
369003	Avanti® J-E Centrifuge, 50 Hz, 230 V, 24 A
363120	Avanti® J-30I Centrifuge, 50 Hz, 230 V
363118	Avanti® J-30I Centrifuge, 60 Hz, 200/208/240 V
363121	Avanti® J-30I Centrifuge, 3-Phase, 50 Hz, 380 V
363124	Avanti® J-30I Centrifuge with Elutriation System, 50 Hz, 230 V
363125	Avanti® J-30I Centrifuge with Elutriation System, 3-Phase, 50 Hz, 220/380 V
363122	Avanti® J-30I Centrifuge with Elutriation System, 60 Hz, 200/208/240 V
393134	Avanti J-26XPI Elutriation Centrifuge

Tube

356011	Bottle Assembly, Polypropylene, 250 mL, 62 x 120 mm (qty. 6)
356013	Bottle Assembly, Polycarbonate, 250 mL, 62 x 120 mm (qty. 6)
356987	Bottle, with Screw-On Cap, Polycarbonate, Conical, 230 mL, 62 x 141 mm (qty. 6)
356989	Bottle, with Screw-On Cap, Polypropylene, Conical, 230 mL, 62 x 141 mm (qty. 6)
357000	Bottle Assembly, Polycarbonate, 50 mL, 29 x 104 mm (qty. 6)
357001	Bottle Assembly, Polyallomer, 50 mL, 29 x 104 mm (qty. 6)
357002	Bottle, with Screw-On Cap, Polycarbonate, 50 mL, 29 x 104 mm (qty. 25)
357003	Bottle, with Screw-On Cap, Polyallomer, 50 mL, 29 x 104 mm (qty. 25)
357005	Tube, with Snap-On Cap, Polypropylene, 50 mL, 29 x 104 mm (qty. 25)
357007	Tube, Thickwall, Polypropylene, 50 mL, 29 x 104 mm (qty. 25)

Parts

870137	Pin, Spring, for JA-14 Rotor Lid
360473	Lid Assembly