Home > CENTRIFUGATION > All Products > JA-30.50 Ti Rotor, Fixed Angle, Titanium, Single Lock Lid, 8 x 50 mL, 30,000 rpm, 108,860 x g

JA-30.50 Ti Rotor, Fixed Angle, Titanium, Single Lock Lid, 8 x 50 mL, 30,000 rpm, 108,860 x g

[print this page]

Part Number: 363421

JA-30.50 Ti Fixed-Angle Rotor with Single Lock Lid, Titanium

Major applications: Harvesting bacteria, processing tissue homogenates, subcellular particulates, routine pelleting such as precipitates and phase separations.

For use in AvantiÂ® J Series centrifuges (except Avanti J-E) and J2 Series centrifuges.

Quantity:

Specifications

UNSPSC:	41103909
Rotor Type:	High Performance - Fixed Angle
Maximum Speed (RPM):	30,000 rpm
*Maximum RCF at r max (g):*	108,860 x g
k-Factor:	280
Rotor Material:	Titanium
Imbalance Tolerance:	2 g
r min:	40.0 mm
r av:	74.0 mm
r max:	108.0 mm
Nominal Rotor Capacity:	400 mL
Number of Rotor Cavities x Nominal Largest Load Capacity:	8 x 50 mL
Nominal Largest Container/Bucket/Carrier/Canister Dimensions:	25 x 104 mm

Adapter

361703	Adapter, Ultem, Bottle, 16 mm dia (qty. 2)
361705	Adapter, Ultem, Tube, 11 mm dia (qty. 2)

Consumable

11757	O-Ring, Rotor, Small
870612	O-Ring, Lid, Rotor, JA-20 JA-21

Instrument

363120	Avanti® J-30I Centrifuge, 50 Hz, 230 V
363118	Avanti® J-30I Centrifuge, 60 Hz, 200/208/240 V
363121	Avanti® J-30I Centrifuge, 3-Phase, 50 Hz, 380 V
363124	Avanti® J-30I Centrifuge with Elutriation System, 50 Hz, 230 V
363125	Avanti® J-30I Centrifuge with Elutriation System, 3-Phase, 50 Hz, 220/380 V
363122	Avanti® J-30I Centrifuge with Elutriation System, 60 Hz, 200/208/240 V
393134	Avanti J-26XPI Elutriation Centrifuge
393133	Avanti J-26XPI, 200/208/240 V, 50/60 Hz, with Elutriator
393135	Avanti J-26XPI, 220 V, 3 Phase, 50 Hz, with Elutriator
393128	Avanti J-26XPI, 230 V, 50 Hz

Rotors

363420

JA-30.50 Ti Rotor, Fixed Angle, Titanium, Biosafety Lid, 8 x 50 mL, 30,000 rpm, 108,860 x g

Tube

355672	Bottle, with Screw-On Cap, Polycarbonate, 10 mL, 16 x 80 mm (qty. 25)
357000	Bottle Assembly, Polycarbonate, 50 mL, 29 x 104 mm (qty. 6)
357001	Bottle Assembly, Polyallomer, 50 mL, 29 x 104 mm (qty. 6)
357002	Bottle, with Screw-On Cap, Polycarbonate, 50 mL, 29 x 104 mm (qty. 25)
357003	Bottle, with Screw-On Cap, Polyallomer, 50 mL, 29 x 104 mm (qty. 25)
357005	Tube, with Snap-On Cap, Polypropylene, 50 mL, 29 x 104 mm (qty. 25)
357007	Tube, Thickwall, Polypropylene, 50 mL, 29 x 104 mm (qty. 25)
363647	Tube, Thickwall, Polycarbonate, 50 mL, 29 x 104 mm (qty. 25)
363664	Tube, with Snap-On Cap, Polycarbonate, 50 mL, 29 x 104 mm (qty. 25)
356090	Tube, with Snap-On Cap, Polypropylene, 1.5 mL, 11 x 38 mm, Natural (qty. 500)

Parts

363431	Tie-Down, for Single-Locking Lid
363424	Lid Assembly, Biosafety, Tie-Down Assembly Included
363430	Lid Assembly, Single-Locking