For questions about products or ordering, contact us or call 1 800-526-3821 . Cart | beckmancoulter.com | sign in


Home > HPLC > All Products > Autosampler, 508 NM, Basic

Autosampler, 508 NM, Basic


Part Number: 142495



508 NM Autosampler, Basic

The Non-Metallic 508 NM Autosampler, Basic can be controlled by either a front panel control pump or a computer workstation with 32 Karat™ Software. This autosampler features 96 sample capacity with full, partial, or no sample loss injection modes. Options are Peltier sample cooling and integrated programmable column switching valves. This version is available in stainless steel or non-metallic (PEEK). When used with Nouveau Software Version 1.7 or 32 Karat Software and the proper tray configurations, the 508 Autosamplers can be used for sample dilution, standard addition, reagent addition, with mixing and delay programming.

Quantity:
 


Specifications

UNSPSC: 41115714
Height: 44 cm (17.3 in)
Width: 28 cm (11.0 in)
Automation: Dilution, Reagent Addition (requires 32 Karat Software)
Electrical Requirements: 90 - 132 VAC, 50 - 60 Hz
U.P.S Load: 5 A
Carryover (typical): <= 0.01% with needle wash
Full Loop Injection Range: 10 - 999 µL
Full Loop Reproducibility (typical): <= 0.3% RSD
Length: 54 cm (21.3 in)
Loop Volume: 10 - 999 µL
Needle Wash: Programmable: between injections, between vials, end of series
Partial Loop Injection Range: < 50% loop volume
Partial Loop Reproducibility (typical): <= 0.5% RSD, >= 5 µL
Programming: System Gold pump with System Control Center or 32 Karat Software
Sample Cooling: 4° C to 40° C Peltier (optional)
Accuracy ± 2° C Cooling ring at 80% relative humidity and 31° C ambient temperature
Stream Switching: Two 6-port valves (optional)